Wildland (Wildfire) Fire Fighting Garments

At Fire & Safety Solutions, we only provide the highest quality PPE.
Our Wildland (Wildfire) Fire Fighting Jackets & Coats are made from Proban and are certified to AS/NZS 4824(Int)2002. We can provide fire gear for all your needs.

Product Features:

Wildland (Wildfire) Fire Fighting Proban Jackets

  • Contoured stand up collar designed for maximum thermal protection. Throat tab closure.
  • Underarm vents with press stud front closure.
  • Concealed press stud closure.
  • 50mm 3M Firetrim around base oand sleeves. Extra layer of Proban underneath reflective trim.
  • Large bellows pockets with Velcro closure and drain holes.
  • Velcro closure tabs on sleeve tabs.
  • Draw cord around base of jacket.
  • All stress points bar tacked.

Wildland (Wildfire) Fire Fighting Proban Trousers

  • Elastic waist with draw cord and metal zip.
  • Reinforced knee areas.
  • 50mm 3M Firetrim around trouser cuff. Extra layer of Proban fabric underneath reflective trim.
  • All stress points bar tacked.

Please contact us for a sizing chart to ensure that your fire fighting apparel provides the best fit.


Wildfire Apparel

Wildland Fire Fighting Garments

Protex® Wildland Fire Fighter Ensemble
Product Class: Protex Firefighter (Wildland)

Product Certification: Independently Certified Fully Compliant To AS 4824

Large protective lift up collar

FR hooks & loop tape fastened Under arm vents to increase air circulation & reduce metabolic heat

3M FIRETRIM® 50mm yellow/silver FR reflective tape (fabric backed)


Structural Apparel

Designed for fire fighting in urban and structural environments and including the following features:

Fully enclosed collar with FR hook & loop tape fastened strap

Storm flap jacket front closure fastened by 50mm FR hook & loop tape

Batwing design for ease of movement and reduction of arm cuff “ride” when arms held above the head.

Product Class: Protex® Firefighter (structural)

Product Certification: Independently Certified Fully Compliant to AS 4967 (type One)


MAKO Structural Turn Out Gear

Our New MAKO Structural Fire Fighting Turn Out Gear has just been released.

Certified to Australian Standard AS4967- 2009.

The MAKO Structural Turn Out Gear is ultra light weight and more supple while providing the highest levels of protection. The MAKO suit allows a fire-fighter to move easily and comfortably in every kind of situation, from fires and toxic spills to traffic accidents.

The high performance characteristics of the MAKO Structural are as impressive as the technology that goes into it.

The MAKO Structural Turn Out Gear combines Blended Kevlar®/Nomex® fire-fighting systems.

This premium 3-layer system combines the thermal resistance of Nomex and the strength of Kevlar.

It provides outstanding protection from flame and radiant heat transference yet allows body heat to escape as evidenced by its water vapour resistance and Total Heat Loss (THL) performances.

The high Kevlar content in the outer barrier ensures maximum strength after multiple exposures to extreme heat.

All this protection is delivered in a fire-fighting suit designed with around 15% less weight than similar garments to give fire-fighters greater freedom of movement and comfort.

Additional compression padding on the shoulders makes the MAKO Structural Fire Fighting Ensemble perfect for carrying heavy loads like fire hoses or ladders.

The MAKO Structural also has additional padding on the knees and elbows.

In most cases, very short lead times. Contact us for a quote.



XRI Plus Cover-all

Ideally suited for Off Shore Oil & Gas the XRI Plus Cover-all is Proban Treated for Flame Retardant Protection.

The XRI-Plus maintains the functional fit and design that the original XRI garment became know for, but now with enhanced features to further meet the needs for those that require more than just conventional work wear.

The XRI-Plus coverall is ideally suited for:

Mines Rescue
Underground mining
Urban Search and Rescue
Heavy industrial environments
High Angle/Line Rescue
Offshore Oil and Gas

The XRI-Plus is manufactured from a lighter weight, breathable fabric that is a blend of 88% cotton and 12% high tenacity (HT) nylon.

The fabric is Proban treated for flame retardant protection.

The introduction of the small quantity of HT nylon to the outward face of the fabric improves abrasion resistance and fabric stability, therefore leading to a more durable garment .

This blended fabric has a supple feel which, in combination with the high cotton content and the lighter weight, result in a more comfortable garment. This is the modern approach to high cotton content flame retardant fabrics – superior comfort and improved robustness.

The HT nylon content does not interfere with nor reduce the Proban flame retardant protection, fully passing EN 533 Index 3, EN 531 and EN 470-1 para 6.1.

Further, the fabric has fully passed the testing requirements of AS/NZS 4824: 2006 for wildland fire fighting.

(The garment itself was not designed for fire fighting).

The High Visibility Orange colour of the XRI-Plus meets the requirements of AS/NZS 1906.4: 1997 clause 2.4 for nonfluorescent high daytime visibility orange/red background fabric for normal use.

The 3M #8935 50mm wide silver reflective tape (flame retardant) in the configuration present on the XRI-Plus coverall meets the requirements of AS/NZS4602: 1999 for
high visibility.

COLOUR: Spliced High Visibility Orange/Navy


AVAILABLE SIZES: 82R to 117R, 92S to 132S, 89L to 94L

REFLECTIVE TAPE: 3M #8935 50mm

FABRIC: 88% Cotton/12% High Tenacity Nylon Silver Flame Retardant